I started to do an update to "A very short play in three scenes" but it quickly became a little too long for the update.
First, let me give props to Buds gun shop. I sent emails to both Buds who sold me the gun and Hi-point who manufactured it. It wasn't clear who assembled the package deal and hence who is responsible for the fix. Derek at Buds emailed on Dec 26 (Sunday after Christmas) and explained they buy the package deal from Hi-Point but offered to assist in resolving the problem with Hi-Point.
Hi point never responded but they did answer their phone today. The phone was answered by a realperson(tm) not a voice-jail system. I explained the problem and she answered "I know there's an easy solution to that problem but I don't know what it is. Standby while I connect you to someone that can explain it."
Next human voice on the phone says simply "Turn it over". And patiently waited over my objections how it can't be done. Eventually I unscrewed the mounting screws and the solution became obvious. The rails are C channels but with different lengths on the legs. One side fits 3/8" rails and the other side fits 5/8" Weaver rails. Nice!
He said there is supposed to be some documentation in the box explaining this (RTFM!) but I still haven't find it.
I'm just glad it was an easy fix.
Showing posts with label Customer Service WIN. Show all posts
Showing posts with label Customer Service WIN. Show all posts
27 December 2010
26 March 2010
Shopping Spree
No, no gunnie stuff. Just a story of customer service as it should be.
A long time ago, in this galaxy, one of the SCSibling units gave me a gift certificate to a Orchard Hardware Supply, a California based chain of hardware stores. The stores are bigger than ACE but smaller than Home Depot or Lowes.
Another SCSibling unit worked there and mentioned they were very customer service oriented. If you wanted to buy one nail, they would just sell you one nail. But if you needed a complete MIG welder kit, they could handle that too.
Anyway, the closest store is some 300 miles away and the certificate had a 1998 expiration date. So while I've hung on to the gift cert, I also haven't been near a store in years. On the trips up to see the 'rents, I'd either forget it or wouldn't have time to get to the local store.
Today we had both the time and the certificate and went on a spree:
* Chainsaw file guide (Thank's TBS)
* #2 Phillips screw bits
* Hacksaw blades
* Toilet fill valve kit
* 3/4" rubber grommets
* Lawn mower air filter
* Earplugs
* Utility knife
* Weeder tool
With tax the total came to $40.82. We handed over the certificate and cash. The cashier examined the certificate then looked on her register for some clue as to how to redeem it. Not seeing an obvious answer she asked the next cashier. Seeing how old it is, she said it predated their current gift card system and we would have to send it in to HQ and get it re-issued. We explained that we are from out of state and that is why it hasn't been redeemed in that time.
They called the manager... who apparently asked how much was the certificate for and how much were we spending. The manager OK'd the purchase.
That was it... No polite reminders of the gift certificate law in this state (They can't expire). No veiled threats. Just a couple minutes delay to get the manager's nod. The seem to have a good understanding of the economics of the situation. They've had use of the cash for a decade and a half and are now handing over goods that were much cheaper now than then. And customers talk to other customers and relate the experience for better or worse. That's how customer service should be.
I'd shop there again.
A long time ago, in this galaxy, one of the SCSibling units gave me a gift certificate to a Orchard Hardware Supply, a California based chain of hardware stores. The stores are bigger than ACE but smaller than Home Depot or Lowes.
Another SCSibling unit worked there and mentioned they were very customer service oriented. If you wanted to buy one nail, they would just sell you one nail. But if you needed a complete MIG welder kit, they could handle that too.
Anyway, the closest store is some 300 miles away and the certificate had a 1998 expiration date. So while I've hung on to the gift cert, I also haven't been near a store in years. On the trips up to see the 'rents, I'd either forget it or wouldn't have time to get to the local store.
Today we had both the time and the certificate and went on a spree:
* Chainsaw file guide (Thank's TBS)
* #2 Phillips screw bits
* Hacksaw blades
* Toilet fill valve kit
* 3/4" rubber grommets
* Lawn mower air filter
* Earplugs
* Utility knife
* Weeder tool
With tax the total came to $40.82. We handed over the certificate and cash. The cashier examined the certificate then looked on her register for some clue as to how to redeem it. Not seeing an obvious answer she asked the next cashier. Seeing how old it is, she said it predated their current gift card system and we would have to send it in to HQ and get it re-issued. We explained that we are from out of state and that is why it hasn't been redeemed in that time.
They called the manager... who apparently asked how much was the certificate for and how much were we spending. The manager OK'd the purchase.
That was it... No polite reminders of the gift certificate law in this state (They can't expire). No veiled threats. Just a couple minutes delay to get the manager's nod. The seem to have a good understanding of the economics of the situation. They've had use of the cash for a decade and a half and are now handing over goods that were much cheaper now than then. And customers talk to other customers and relate the experience for better or worse. That's how customer service should be.
I'd shop there again.
Subscribe to:
Posts (Atom)